TRUCK BODY/SPREADER

12M Dump Body/Spreader

– Floor strength of the 12M dump body/spreader ensures an even lift from side tilt cylinders. Eliminates the necessity of a 50/50 flow divider. Side tilt cylinders are equipped with a nitrated rod. Hinged conveyor cover remains with body at all times.

– Six (6) panel tailgate includes 3/16” thick Brinell 450 steel.Full width tailgate enables 12M dump body to undertake all dump body functions.

– Floor rotates on 1 3/4” hard induction chromed hinge shaft for superior strength.

– Long members of 10” I-Beam @ 25.4 lb/ft. STANDARDS.

-Bolt-on floor with 3 greasing points on single axle,4 greasing points on tandem axle.

– Floor and conveyor cover is constructed from 3/16” thick Brinell 450 steel.

– Honeycomb type floor under structure creates a material shedding design

* 10′, 13′ and 14′ only

LOW CENTER OF GRAVITY

 

A. Load is substantially diminished before requiring activation of side tilt mechanism.

B. Full capacity of body is utilized.

C. Rapidly convert from dump to spread mode by adjusting hinged conveyor cover.

Sourcewell Awarded Contract
MODELS NUMBER INSIDE
LENGTH
INSIDE
WIDTH
SIDE
HEIGHT
TAILGATE
HEIGHT
WATER LEVER
CAPACITY
WEIGHT
(APPROX.)
TCB-9-T-AL-S-LF 9’ 88’’ 27’’ 52’ 5.5 cu yds 4 360 lbs
TCB-10-T-AL-S-LF 10’ 88’’ 27’’ 52’ 6.11 cu yds 4 860 lbs
TCB-11-T-AL-S-LF 11’ 88’’ 27’’ 52’ 6.72 cu yds 5 360 lbs
TCB-12-T-AH-S-LF 12’ 88’’ 39’’ 52’ 10.59 cu yds 5 880 lbs
TCB-13-T-AH-S-LF 13’ 88’’ 39’’ 52’ 11.47 cu yds 6 300 lbs
TCB-14-T-AH-S-LF 14’ 88’’ 39’’ 52’ 12.35 cu yds 6 670 lbs
TCB-20-T-CH-C-CH-LF 20’ 88’’ 39’’ 51’ 9.89 cu yds 8 800 lbs
TCB-20-T-CH-S-LF 20’ 88’’ 39’’ 51’ 16.44 cu yds 9 300 lbs

OPTIONS

  • Sides and front panel manufactured from Brinell 450 steel
  • Aluminum tailgate
  • Electronic spreader control
  • Coal chute door (1, 2, or 3 as needed)
  • Rear tailgate lateral opening (barn door)
  • Bolt-on apron
  • Pre-wetting system with 160 gallon tank installed under cabshield
  • Summer chute
  • Special paint
  • Hydraulically actuated discharge chute
  • Screens
  • Lights in rear corner posts
  • Extended greasing points on floor hinge (3 or 4)
  • Sides, front panel and tailgate constructed from 304 stainless steel
  • Hinged, fold-up type ladder
PHOTO GALLERY
Airport Product 21
Airport Product 22
Airport Product 23
Airport Product 24
Airport Product 25
Airport Product 26
Airport Product 27
Airport Product 28
Airport Product 29
Frame Mount Spreader 1
Frame Mount Spreader 2
Frame Mount Spreader 3
Frame Mount Spreader 4
Frame Mount Spreader 5
Frame Mount Spreader 6
Frame Mount Spreader 7
Frame Mount Spreader 8
Frame Mount Spreader 9
Frame Mount Spreader 10
Reversible Plow 10
Reversible Plow 11
Reversible Plow 12
Slide In Spreader 2
Slide In Spreader 3
Slide In Spreader 4
Slide In Spreader 5
Slide In Spreader 6