Tenco’s U-COMBO truck body combines all the features of a dump body and a spreader in one. Available in a range of models, the U-COMBO allows you to spread abrasive/deicing materials from both sides of the truck, as well as from the rear. With this type of truck body, switching from dump to spread mode is as easy as child’s play.
| MODELS NUMBER | HOPPER LENGTH |
OVERALL LENGTH |
INSIDE WIDTH |
SIDE HEIGHT |
TAILGATE HEIGHT |
WATER LEVER CAPACITY |
WEIGHT |
|---|---|---|---|---|---|---|---|
| TCM-10-T | 10′ | 10’6″ | 91 5/8″ | 46″ | 47″ | 7.7 cu yds | 4 460 lbs |
| TCM-11-T | 11′ | 11’6″ | 91 5/8″ | 46″ | 55″ | 8.5 cu yds | 4 797 lbs |
| TCM-12-T | 12′ | 12’6″ | 91 5/8″ | 46″ | 55″ | 9.4 cu yds | 5 127 lbs |
| TCM-13-T | 13′ | 13’6″ | 91 5/8″ | 46″ | 63″ | 10.2 cu yds | 5 221 lbs |
| TCM-14-T | 14′ | 14’6″ | 91 5/8″ | 46″ | 63″ | 11.1 cu yds | 5 315 lbs |
| TCM-15-T | 15′ | 15’6″ | 91 5/8″ | 46″ | 66″ | 12 cu yds | 5 885 lbs |
| TCM-16-T | 16′ | 16’6″ | 91 5/8″ | 46″ | 66″ | 12.8 cu yds | 6 450 lbs |
Optional pre-wet liquid tanks integrated into dump body.
Optional pre-wet liquid tanks installed below cabshield.
Main conveyor is driven through planetary drive mechanism utilizing a 10 cu in displacement motor and 2” diameter driveshaft.
