Every component of the 900 Series scraper has been meticulously designed to withstand the most severe road maintenance tasks encountered year round.
– 1’ thick one-piece unnotched rotating plate
– Lift cylinder/trip spring canisters are retained by 8 1/4” x 8 1/4” 4-bolt flanges
– Two (2) 4” diameter double acting reverse cylinders are protected by a cross-over relief valve
– Reversing cylinders are attached to rotating plate through 2” pivot pins
– Safety mechanism
| NEW MODELS NUMBER |
MOLDBOARD LENGTH |
MOLDBOARD THICKNESS |
MOLDBOARD HEIGHT |
CUTTING WIDTH at 45° |
WEIGHT |
|---|---|---|---|---|---|
| TCU-910-T-K-RH | 10′ | 1″ | 20″ | 7′ 1″ | 1 950 lbs |
| TCU-911-T-K-RH | 11′ | 1″ | 20″ | 7′ 9″ | 2 050 lbs |
| TCU-912-T-K-RH | 12′ | 1″ | 20″ | 8′ 6″ | 2 150 lbs |
– 25 degree angle
– 1/4” Brinell 450 blade
– 4 x 50 W reinforcement
– Floating down by chain
– Low maintenance
– Easy installation
– 2 triple convolution type air bags with strength right
on cutting edge for better down force
| NEW MODELS NUMBER |
MOLDBOARD LENGTH |
MOLDBOARD THICKNESS |
MOLDBOARD HEIGHT |
CUTTING WIDTH at 45° |
WEIGHT |
|---|---|---|---|---|---|
| TCU-311-T-P-X | 11′ | .25” / Hardox 450 |
15″ | 119 5/8” | 1 430 lbs |
